How to get the IP address of a KVM/virsh VM

Since virsh domifaddr doesn’t work to get the IP addresses of VMs on a bridged network, I wrote a get-vm-ip script (which you can download from Github) which uses this to get the IP of a running VM:

HOSTNAME=[your vm name]
MAC=$(virsh domiflist $HOSTNAME | awk '{ print $5 }' | tail -2 | head -1)
arp -a | grep $MAC | awk '{ print $2 }' | sed 's/[()]//g'

The virsh command gets the MAC address, the last line finds the IP address using arp.

Hope you find this useful.

Share Button

Use .iso and Kickstart files to automatically create Ubuntu VMs

I was looking for a way to automate the creation of VMs for testing various distributed system / cluster software packages. I’ve used Vagrant in the past but I wanted something that would:

  • Allow me to use raw ISO files as the basis for guest VMs.
  • Guest VMs should be set up with bridged IPs that are routable from the host.
  • Guest VMs should be able to reach the Internet.
  • Other hosts on the local network should be able to reach guest VMs. (Setting up additional routes is OK).
  • VM creation should work with any distro that supports Kickstart files.
  • Scripts should be able to create and delete VMs in a scripted, fully-automatic manner.
  • Guest VMs should be set up to allow passwordless ssh access from the “ansible” user.

I’ve previously used virsh’s virt-install tool to create VMs and I like how easy it is to set up things like extra network interfaces and attach existing disk images. The scripts in this repo fully automate the virsh VM creation process.


I put all of my code into a Github repo containing these scripts:

  • create-vm – Use .iso and kickstart files to auto-generate a VM.
  • delete-vm – Delete a virtual machine created with create-vm.
  • get-vm-ip – Get the IP address of a VM managed by virsh.
  • encrypt-pw – Returns a SHA512 encrypted password suitable for pasting into Kickstart files.

I’ve also included a sample ubuntu.ks Kickstart file for creating an Ubuntu host.

Host setup

I’m running the scripts from a host with Ubuntu Linux 18.10 installed. I added the following to the host’s Ansible playbook to install the necessary virtualization packages:

  - name: Install virtualization packages
name: "{{item}}"
state: latest
- qemu-kvm
- libvirt-bin
- libvirt-clients
- libvirt-daemon
- libvirt-daemon-driver-storage-zfs
- python-libvirt
- python3-libvirt
- system-config-kickstart
- vagrant-libvirt
- vagrant-sshfs
- virt-manager
- virtinst

If you’re not using Ansible just apt-get install the above packages.

Sample Kickstart file

There are plenty of documents on the Internet on how to set up Kickstart files.

A couple of things that are special about the included Kickstart file

The Ansible user: Although I’d prefer to create the “ansible” user as a locked account,with no password just an ssh public key, Kickstart on Ubuntu does not allow this, so I do set up an encrypted password.

To set up your own password, use the encrypt-pw script to create a SHA512-hashed password that you can copy and paste into the Kickstart file. After a VM is created you can use this password if you need to log into the VM via the console.

To use your own ssh key, replace the ssh key in the %post section with your own public key.

The %post section at the bottom of the Kickstart file does a couple of things:

  • It updates all packages with the latest versions.
  • To configure a VM with Ansible, you just need ssh access to a VM and Python installed. on the VM. So I use %post to install an ssh-server and Python.
  • I start the serial console, so that virsh console $vmname works.
  • I add a public key for Ansible, so I can configure the servers with Ansible without entering a password.

Despite the name, the commands in the %post section are not the last commands executed by Kickstart on an Ubuntu 18.10 server. The “ansible” user is added after the %post commands are executed. This means that the Ansible ssh public key gets added before the ansible user is created.

To make key-based logins work I set the UID:GID of authorized_keys to 1000:1000. The user is later created with UID=1000, GID=1000, which means that the authorized_keys file ends up being owned by the ansible user by the time the VM creation is complete.

Create an Ubuntu 18.10 server

This creates a VM using Ubuntu’s text-based installer. Since the `-d` parameter is used,progress of the install is shown on screen.

create-vm -n node1 \
-i ~/isos/ubuntu-18.10-server-amd64.iso \
-k ~/conf/ubuntu.ks \

Create 8 Ubuntu 18.10 servers

This starts the VM creation process and exits. Creation of the VMs continues in the background.

for n in `seq 1 8`; do
create-vm -n node$n \
-i ~/isos/ubuntu-18.10-server-amd64.iso \
-k ~/conf/ubuntu.ks

Delete 8 virtual machines

for n in `seq 1 8`; do
delete-vm node$n

Connect to a VM via the console

virsh console node1

Connect to a VM via ssh

ssh ansible@`get-vm-ip node1`

Generate an Ansible hosts file

echo '[hosts]'
for n in `seq 1 8`; do
ip=`get-vm-ip node$n`
echo "node$n ansible_ip=$ip ansible_user=ansible"
) > hosts

Handy virsh commands

  • virsh list – List all running VMs.
  • virsh domifaddr node1 – Get a node’s IP address. Does not work with all network setups,which is why I wrote the get-vm-ip script.
  • virsh net-list – Show what networks were created by virsh.
  • virsh net-dhcp-leases $network – Shows current DHCP leases when virsh is acting as the DHCP server. Leases may be shown for machines that no longer exist.

Known Issues

  • VMs created without the -d (debug mode) parameter may be created in “stopped” mode. To start them up, run the command virsh start $vmname
  • Depending on how your host is set up, you may need to run these scripts as root.
  • Ubuntu text mode install messes up terminal screens. Run reset from the command line to restore a terminal’s functionality.
  • I use Ansible to set a guest’s hostname, not Kickstart, so all Ubuntu guests created have the host name “ubuntu”.

Hope you find this useful.

create-vm script

Download create-vm from Github


# create-vm - Use .iso and kickstart files to auto-generate a VM.

# Copyright 2018 Earl C. Ruby III
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# See the License for the specific language governing permissions and
# limitations under the License.


cat << EOF
usage: $0 options

This script will take an .iso file created by revisor and generate a VM from it.

-h Show this message
-n Host name (required)
-i Full path and name of the .iso file to use (required)
-k Full path and name of the Kickstart file to use (required)
-r RAM in MB (defaults to ${RAM})
-c Number of VCPUs (defaults to ${VCPUS})
-s Amount of storage to allocate in GB (defaults to ${STORAGE})
-b Bridge interface to use (defaults to ${BRIDGE})
-m MAC address to use (default is to use a randomly-generated MAC)
-v Verbose
-d Debug mode

while getopts "h:n:i:k:r:c:s:b:m:v:d" option; do
case "${option}"
exit 0
r) RAM=${OPTARG};;
m) MAC=${OPTARG};;
v) VERBOSE=1;;
d) DEBUG=1;;

if [[ -z $HOSTNAME ]]; then
echo "ERROR: Host name is required"
exit 1

if [[ -z $ISO_FQN ]]; then
echo "ERROR: ISO file name or http url is required"
exit 1

if [[ -z $KS_FQN ]]; then
echo "ERROR: Kickstart file name or http url is required"
exit 1

if ! [[ -f $ISO_FQN ]]; then
echo "ERROR: $ISO_FQN file not found"
exit 1

if ! [[ -f $KS_FQN ]]; then
echo "ERROR: $KS_FQN file not found"
exit 1
KS_FILE=$(basename "$KS_FQN")

if [[ ! -z $VERBOSE ]]; then
echo "Building ${HOSTNAME} using MAC ${MAC} on ${BRIDGE}"
echo "======================= $KS_FQN ======================="
cat "$KS_FQN"
echo "=============================================="
set -xv

mkdir -p $VM_IMAGE_DIR/{images,xml}

virt-install \
--connect=qemu:///system \
--name="${HOSTNAME}" \
--bridge="${BRIDGE}" \
--mac="${MAC}" \
--disk="${VM_IMAGE_DIR}/images/${HOSTNAME}.img,bus=virtio,size=${STORAGE}" \
--ram="${RAM}" \
--vcpus="${VCPUS}" \
--autostart \
--hvm \
--arch x86_64 \
--accelerate \
--check-cpu \
--os-type=linux \
--force \
--watchdog=default \
--extra-args="ks=file:/${KS_FILE} console=tty0 console=ttyS0,115200n8 serial" \
--initrd-inject="${KS_FQN}" \
--graphics=none \
--noautoconsole \
--debug \

if [[ ! -z $DEBUG ]]; then
# Connect to the console and watch the install
virsh console "${HOSTNAME}"
virsh start "${HOSTNAME}"

# Make a backup of the VM's XML definition file
virsh dumpxml "${HOSTNAME}" > "${VM_IMAGE_DIR}/xml/${HOSTNAME}.xml"

if [ ! -z $VERBOSE ]; then
set +xv

ubuntu.ks Kickstart file

Download ubuntu.ks on Github.

# System language
lang en_US
# Language modules to install
langsupport en_US
# System keyboard
keyboard us
# System mouse
# System timezone
timezone --utc Etc/UTC
# Root password
rootpw --disabled
# Initial user
user ansible --fullname "ansible" --iscrypted --password $6$CfjrLvwGbzSPGq49$t./6zxk9D16P6J/nq2eBVWQ74aGgzKDrQ9LdbTfVA0IrHTQ7rQ8iq61JTE66cUjdIPWY3fN7lGyR4LzrGwnNP.
# Reboot after installation
# Use text mode install
# Install OS instead of upgrade
# Use CDROM installation media
# System bootloader configuration
bootloader --location=mbr 
# Clear the Master Boot Record
zerombr yes
# Partition clearing information
clearpart --all 
# Disk partitioning information
part / --fstype ext4 --size 3700 --grow
part swap --size 200 
# System authorization infomation
auth  --useshadow  --enablemd5 
# Firewall configuration
firewall --enabled --ssh 
# Do not configure the X Window System
%post --interpreter=/bin/bash
echo ### Redirect output to console
exec < /dev/tty6 > /dev/tty6
chvt 6
echo ### Update all packages
apt-get update
apt-get -y upgrade
# Install packages
apt-get install -y openssh-server vim python
echo ### Enable serial console so virsh can connect to the console
systemctl enable serial-getty@ttyS0.service
systemctl start serial-getty@ttyS0.service
echo ### Add public ssh key for Ansible
mkdir -m0700 -p /home/ansible/.ssh
cat <<EOF >/home/ansible/.ssh/authorized_keys
ssh-rsa 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 ansible@host
echo ### Set permissions for Ansible directory and key. Since the "Initial user"
echo ### is added *after* %post commands are executed, I use the UID:GID
echo ### as a hack since I know that the first user added will be 1000:1000.
chown -R 1000:1000 /home/ansible
chmod 0600 /home/ansible/.ssh/authorized_keys
echo ### Change back to terminal 1
chvt 1
Share Button